1. Help Center
  2. Product Information

Component Care

Specific care instructions for all of our components to promote longevity.

2. Product care instructions by range

Very pared back care instructions can be found here https://au.keepcup.com/care

As a general rule;

  • Dishwasher safe on the top rack - we advise hand-washing most components for longevity of surface finish, however most components are dishwasher safe ie. they won't melt in the dishwasher
  • Store with the lid off - storing with lid on can eventually stretch the lid and cause leaking
  • Wait 10-20 seconds before putting your lid on, to allow steam release - helps to ventilate the drink and prevent steam build-up under the lid

Press Fit Range:

Tempered Glass

  • Dishwasher safe on the top rack
  • Microwaveable, but with the lid off, up to 100°C / 212°F
  • Avoid putting in the freezer to prevent risk of cracking the cup
  • Caution: rapid and extreme temperature change may cause the glass cup to shatter. Avoid placing freezing cup in boiling water or vice versa.

Cork Band

  • Do not remove cork band
  • Hand wash only while on the cup
  • Do not microwave

Stainless Steel

  • Hand wash to preserve colour finish
  • Do not microwave
  • Avoid putting in the freezer to prevent risk of damaging the cup

Plastic

  • Coloured plastic cups are dishwasher safe on the top rack
  • Clear plastic cups are best hand-washed to avoid clouding
  • Microwaveable, but with the lid off, up to 100°C / 212°F
  • Avoid putting in the freezer to prevent risk of cracking the cup

Longplay outer sleeve

  • About once a week, take it fully apart to clean and allow to dry before assembling
  • Hand wash to prevent staining or clouding
  • Microwaveable, but with the lid off, up to 100°C / 212°F

Helix Range:

Stainless Steel

  • Hand wash to preserve finish
  • Do not microwave
  • Avoid putting in the freezer to prevent risk of cracking the cup

Plastic

  • Hand wash to prevent staining or clouding
  • Microwaveable, but with the lid off, up to 100°C / 212°F
  • Avoid putting in the freezer to prevent risk of cracking the cup
 

 Stainless Steel

  • Remove silicone ring gaskets for thorough clean
  • Hand wash to preserve finish
  • Do not microwave
  • Avoid putting in the freezer to prevent risk of cracking the bottle
  • Do not fill with fizzy drinks. It causes pressure build up on the twist fit seal.

Plastic

  • Remove silicone ring gaskets for thorough clean
  • Hand wash to prevent staining or clouding
  • Do not microwave
  • Avoid putting in the freezer to prevent risk of cracking the bottle
  • Do not fill with fizzy drinks. It causes pressure build up on the twist fit seal.

Helpful Templates / Snippets to answer queries regarding materials, manufacturing and care:

Sustainability prioritisation in materials

WHERE ARE KEEPCUPS MADE?

Glass logo print - what's it made of

Product BPA

BPA and BPS free

Lid Care Recommendations

Gasket - Mould Bottle Cap/Staining Lid

Gasket- Smelly: Bottle

Bottle Brush requirement